Single digital gateway for public services
Authorization of legal persons
favorite_border
Add favorite
Procedure
Online
Companii
National
The legal person who requires authorization for his metrological laboratory must file to the head office of the BRML territorial unit an application accompanied by the documents required by the legal metrology procedure PML 5-04-05, 4th edition-Requirements for metrological laboratories-approved by Order no. 61/2011. PML 5-04-05 of the BRML Director General. PML 5-04-05 4th edition is available on the BRML website at http://www.brml.ro/proceduri-de-metrologie-legala. The Laboratory Authorization will be issued within 30 days after the registration of application, if non-conformities were not found during assessment, or 60 days after the registration of application, if non-conformities were found during assessment.
Entitled persons
Regulated professions
Required documents
Denumire
Descriere
Obligatoriu
Semnătură digitală
Tip document
Descarcă
-
Cererea de autorizare
Descarcă
Scanned document
The authorization request template is also presented in Annex 1 of the legal metrology procedure PML 5-04-05, edition 5, published on the website www.brml.ro, link http://www.brml.ro/proceduri-de-metrologie-legala*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
The form with general information about the metrology laboratory (Annex 2),*
Descarcă
Scanned document
The template of this form is also presented in Annex 2 of the legal metrology procedure PML 5-04-05, edition 5, published on the website www.brml.ro, link http://www.brml.ro/proceduri-de-metrologie-legala. The form is not submitted in the case of a request to extend the authorization of the metrology laboratory.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Organizational chart of the metrology laboratory*
Descarcă
Scanned document
The form is not submitted in case of requesting the extension of the metrology laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Organizational chart of the organization to which the laboratory belongs, with clear specification of the laboratory's position within the organization*
Descarcă
Scanned document
The form is not submitted in the case of a request for the extension of the metrology laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
The decision of the manager of the economic operator to appoint the technical responsible for the metrology activity, the laboratory management, and each function that influences the results of the laboratory activities*
Descarcă
Scanned document
It is not submitted in the case where the extension of the metrology laboratory authorization is requested with types/subtypes of measuring instruments for locations listed in the metrology laboratory authorization. It is submitted if the extension of the metrology laboratory authorization is requested with locations other than those listed in the laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
List of standards, verification equipment, working measuring means, installations, utilized machinery*
Descarcă
Scanned document
The list will be drawn up for each location separately, accompanied, in case the laboratory does not own all the standards, verification equipment, working measuring devices, installations, and machinery used, by the document concluded between the owner and the laboratory, through which the latter may use them.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
The CE copies/ certification documents for all working standards/ measuring instruments/ verification equipment used*
Descarcă
Scanned document
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
List of laboratory staff who carry out metrological verifications*
Descarcă
Scanned document
If the laboratory carries out its activity in locations other than the registered office, this list will be drawn up for each location separately. The template of this list is also provided in Annex 4 of the legal metrology procedure PML 5-04-05, edition 5, published on the website www.brml.ro, link http://www.brml.ro/proceduri-de-metrologie-legala*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Copies of the metrological verifier authorizations (valid) for the personnel performing metrological verifications*
Descarcă
Scanned document
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
List of varieties/sub-varieties of measuring instruments for which authorization/extension of the laboratory's metrology authorization is requested for performing metrological verifications (Annex 5)*
Descarcă
Scanned document
The list must refer only to the varieties/sub-varieties of mdm for which approval has been received from BRML to start the evaluation process for authorization, prepared for each location separately. The model for this list is also presented in Annex 5 of the legal metrology procedure PML 5-04-05, edition 5, published on the website www.brml.ro, link http://www.brml.ro/proceduri-de-metrologie-legala*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Copy of the constitutive act (statute or equivalent)*
Descarcă
Scanned document
The activity of metrological verification of mdm must be mentioned (NACE code 1997 - M 7430, NACE Code Revision 1 from 2002 – KA 7430 and KA 7487 or NACE Code Revision 2 from 2008 – M 7120 and N8299. It is not submitted in the case of a request for extension of the metrology laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Copy of the registration certificate issued by the National Trade Register Office or equivalent;*
Descarcă
Scanned document
It is not submitted in case the extension of the metrology laboratory authorization is requested with assortments/sub-assortments of measuring instruments for locations that are listed in the metrology laboratory authorization*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Rated sketches (indicating the N-S direction of the laboratory location spaces/newly established or replaced locations)*
Descarcă
Scanned document
It is not submitted in the case where the extension of the metrology laboratory authorization is requested with assortments/sub-assortments of measuring instruments for the locations listed in the metrology laboratory authorization. It is submitted if the extension of the laboratory authorization is requested with locations other than those listed in the laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
The documentation of the metrology laboratory management system (identified by copy number/ edition/ current revision)*
Descarcă
Scanned document
It is not submitted in case the extension of the metrology laboratory authorization is requested with ranges/subranges of measuring instruments for the locations listed in the authorization of the metrology laboratory. It is submitted if the extension of the metrology laboratory authorization is requested with other locations than those listed in the laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
General and specific procedures, work instructions, if these are documented separately (identified by copy number/ edition/ current revision)*
Descarcă
Scanned document
They are not submitted in the case where the extension of the metrology laboratory authorization is requested with types/subtypes of measuring instruments for the locations listed in the metrology laboratory authorization. They are submitted if the extension of the metrology laboratory authorization is requested with other locations than those listed in the laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
The document certifying the management system in accordance with ISO 9001, for Option B of the SR EN ISO/IEC 17025:2018 standard)*
Descarcă
Scanned document
The form is not submitted in the case of requesting the extension of the laboratory's metrology authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Copy of the last internal audit performed and the last analysis performed by the management*
Descarcă
Scanned document
References: the requirements of SR EN ISO/IEC 17025: 2018 and respectively SR EN ISO 9001: 2015 and based on the latest edition/revision of the management system documentation.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Proof of payment for the stage Registration and initiation of authorization/extension of the authorization activities*
Descarcă
Scanned document
It is not submitted in case the extension of the laboratory's metrology authorization is requested for types/subtypes of measuring instruments for locations that are listed in the metrology laboratory authorization. It is submitted if the extension of the laboratory's metrology authorization is requested for locations other than those listed in the laboratory authorization.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
The statement on own responsibility that, during the validity of the held authorization, no modifications have been made or that the modifications made have been communicated to DRML/SJML*
Descarcă
Scanned document
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Correspondence list between the requirements of SR EN ISO/IEC 17025: 2018 (respectively SR EN ISO 9001: 2015) and the points in the management system documentation where these are addressed*
Descarcă
Scanned document
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Certificate issued by the National Trade Register Office showing the registration of the locations where the laboratory carries out its activity*
Descarcă
Scanned document
Only in the case where authorization is requested for multiple locations. It is also submitted in the case of requesting the extension of the metrology laboratory authorization with one or more locations.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Copy of the DRML response letter regarding the start of the evaluation*
Descarcă
Scanned document
The applicant submits to the DRML/SJML in the jurisdiction where they are registered a letter of intent, accompanied by a list of the ranges/subranges of measuring instruments and the types of metrological verifications for which authorization of the laboratory is requested. This will specify: the position from L.O. - 2012, the code and name from LT - 2009 provided in the List of tariffs for works performed by the Romanian Bureau of Legal Metrology LT - 2009, published in the Official Gazette of Romania, Part I, no. 604 / 01.09.2009, with subsequent amendments and completions, for the ranges/subranges of measuring instruments for which authorization is requested. If the laboratory operates in multiple locations, this list will be prepared separately for each location.*
Document obligatoriu
Semnatură digitală obligatorie
Se poate obține prin OOTS
Issued documents
Denumire
Tip document
Descarcă
-
Fees
Title
Payment method
Value
Currency
None
Deadlines
Resolution time:
60
Calendar days
Case filling duration:
5
Calendar days
Notification deadline:
25
Calendar days
Appeal routes
In accordance with the provisions of art. 29(1) of the legal metrology instructions IML 5-05 Authorization of natural and legal persons who carry out metrological verifications, approved by Government Decision no. 1660/2005, with subsequent amendments and completions, any decision not to grant the authorization is properly reasoned, communicated to the applicant within 10 working days from the date of its adoption, and the decision specifies the possibility for the applicant to address the competent courts, in accordance with the law.
*Additional information
More info:
Links
Assistance and problem-solving services
None
Last updated:
22 November 2023
Publicat de către:
A paragraph is a self-contained unit of a discourse in writing dealing with
a particular point or idea. Paragraphs are usually an expected part of
formal writing, used to organize longer prose.
Institution responsible with document:
Publicat de către:
A paragraph is a self-contained unit of a discourse in writing dealing with
a particular point or idea. Paragraphs are usually an expected part of
formal writing, used to organize longer prose.
The Romanian Bureau of Legal Metrology*
*Content marked with an asterisk (*) has been automatically translated and may not fully reflect the original meaning. For objective interpretation, please consult the Romanian version.
The Romanian Bureau of Legal Metrology*
Sos. Vitan Barzesti nr. 11
Telefon:
(4021) 332 09 54
Fax:
(4021) 332 06 15
Email:
office@brml.ro
Table of contents
Competent entities
Direcţia Regională de Metrologie Legală Constanța
Direcția Regională de Metrologie Legală Bacău
Direcţia Regională de Metrologie Legală Braşov
Direcția Regională de Metrologie Legală Cluj-Napoca
Direcţia Regională de Metrologie Legală Craiova
Direcţia Regională de Metrologie Legală Ploiești
Direcţia Regională de Metrologie Legală Timișoara
Biroul Roman de Metrologie Legala-DTRA
Share your opinion
Provide your opinion about the content of this page. You can leave acomment about what we can improve. You will not receive a response toyour comment. Use the contact form to clarify any questions regardingthe information and services available on this portal.
Did you find what you were looking for?
Help us improve